Effects of MDP‑based primers on shear bond strength between resin cement and zirconia

Yue,Xin; Hou,Xiaoyan; Gao,Jing; Bao,Pingping; Shen,Jing

doi:10.3892/etm.2019.7382

Effects of MDP‑based primers on shear bond strength between resin cement and zirconia

Authors:
- Xin Yue
- Xiaoyan Hou
- Jing Gao
- Pingping Bao
- Jing Shen
View Affiliations

Affiliations: International Medical Center, Tianjin Stomatological Hospital, Tianjin 300041, P.R. China, Department of Stomatology, Tianjin First Hospital, Tianjin 300232, P.R. China, Department of Endodontics, Tianjin Stomatological Hospital, Tianjin 300041, P.R. China
Published online on: March 13, 2019 https://doi.org/10.3892/etm.2019.7382
Pages: 3564-3572
Copyright: © Yue et al. This is an open access article distributed under the terms of Creative Commons Attribution License.

Metrics: Total Views: 0 (Spandidos Publications: | PMC Statistics: )

Metrics: Total PDF Downloads: 0 (Spandidos Publications: | PMC Statistics: )

Cited By (CrossRef): 0 citations Loading Articles...

Abstract

Yttria‑stabilized tetragonal zirconia polycrystal (Y‑TZP) ceramics are widely used for fixed dental prostheses and dental implants. Various primers have been introduced to enhance the bonding strength of zirconia crowns. The aim of current study was to analyze the effects of 10‑methacryloyloxydecyl dihydrogen phosphate (MDP) primers on the shear bond strength between zirconia crowns and resin cement were assessed. The total sample size included 90 samples of Y‑TZP ceramic surfaces. Samples in group I were abraded with aluminum oxide. Samples in groups II and III were abraded and primed with the zirconia and Z‑PrimePlus MDP primers, respectively. Group IV samples did not undergo any treatment or application. Group V and VI samples did not undergo any abrasion but were primed with zirconia and Z‑PrimePlus MDP primers, respectively. Prior to bonding of the resin cement, the primers were applied for 1 min and air‑dried. Then, Clearfil SA luting self‑adhesive resin cement was coated onto the zirconia crowns. The highest bond strength was achieved in group III, followed by group II, and group IV exhibited the lowest bond strength between Y‑TZP ceramic and adhesive resin cement. Therefore, the application of MDP primers yielded greater bond strength between Y‑TZP ceramics and adhesive resin cement, compared with the group without the use of primers.

View Figures

View References

1	Al Amleh B, Lyons K and Swain M: Clinical trials in zirconia: A systematic review. J Oral Rehabil. 37:641–652. 2010.PubMed/NCBI
2	De Sa Barbosa WF, Aguiar TR, Francescantonio MD, Cavalcanti AN, de Oliveira MT and Giannini M: Effect of water storage on bond strength of self adhesive resin cements to zirconium oxide ceramic. J Adhes Dent. 15:145–150. 2013.PubMed/NCBI
3	Gonzaga CC, Cesar PF, Miranda WG Jr and Yoshimura HN: Slow crack growth and reliability of dental ceramic. Dent Mater. 27:394–406. 2011. View Article : Google Scholar : PubMed/NCBI
4	Melo RM, Souza RO, Dursun E, Monteiro EB, Valandro LF and Bottino MA: Surface treatments of zirconia to enhance bonding durability. Oper Dent. 40:636–643. 2015. View Article : Google Scholar : PubMed/NCBI
5	Re D, Augusti D, Augusti G and Giovannetti A: Early bond strength to low pressures and blasted zirconia: Evaluation of a self-adhesive cement. Eur J Esthet Dent. 7:164–175. 2012.PubMed/NCBI
6	Tanış MÇ, Akay C and Karakış D: Resin cementation of zirconia ceramics with different bonding agents. Biotechnol Biotechnol Equip. 29:363–367. 2015. View Article : Google Scholar : PubMed/NCBI
7	Murthy V, Manoharan, Balaji and Livingstone D: Effect of four surface treatment methods on the shear bond strength of resin cement to zirconia ceramics- A comparative in vitro study. J Clin Diagn Res. 8:ZC65–ZC68. 2014.PubMed/NCBI
8	Blatz MB, Phark JH, Ozer F, Mante FK, Saleh N, Bergler M and Sadan A: In vitro comparative bond strength of contemporary self adhesive resin cements to zirconium oxide ceramic with and without air particle abrasion. Clin Oral Investig. 14:187–192. 2010. View Article : Google Scholar : PubMed/NCBI
9	Jo EH, Huh YH, Ko KH, Park CJ and Cho LR: Effect of liners and primers on tensile bond strength between zirconia and resin-based luting agent. J Adv Prosthodont. 10:374–380. 2018. View Article : Google Scholar : PubMed/NCBI
10	Yi YA, Ahn JS, Park YJ, Jun SH, Lee IB, Cho BH, Son HH and Seo DG: The effect of sandblasting and different primers on shear bond strength between yttriatetragonal zirconia polycrystal ceramic and a self-adhesive resin cement. Oper Dent. 40:63–71. 2015. View Article : Google Scholar : PubMed/NCBI
11	Shin YJ, Shin Y, Yi YA, Kim J, Lee IB, Cho BH, Son HH and Seo DG: Evaluation of the shear bond strength of resin cement to Y-TZP ceramic after different surface treatments. Scanning. 36:479–486. 2014. View Article : Google Scholar : PubMed/NCBI
12	Sanohkan S, Kukiattrakoon B, Larpboonphol N, Sae-Yib T, Jampa T and Manoppan S: The effect of various primers on shear bond strength of zirconia ceramic and resin composite. J Conserv Dent. 16:499–502. 2013. View Article : Google Scholar : PubMed/NCBI
13	Lim MJ, Yu MK and Lee KW: The effect of continuous application of MDP-containing primer and luting resin cement on bond strength to tribochemical silica-coated Y-TZP. Restor Dent Endod. 43:e192018. View Article : Google Scholar : PubMed/NCBI
14	Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton RM, Sadr A and Tagami J: Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater. 26:426–432. 2010. View Article : Google Scholar : PubMed/NCBI
15	Rohr N, Brunner S, Märtin S and Fischer J: Influence of cement type and ceramic primer on retention of polymer-infiltrated ceramic crowns to a one-piece zirconia implant. J Prosthet Dent. 119:138–145. 2018. View Article : Google Scholar : PubMed/NCBI
16	Silva LHD, Lima E, Miranda RBP, Favero SS, Lohbauer U and Cesar PF: Dental ceramics: A review of new materials and processing methods. Braz Oral Res. 31 (Suppl 1):e582017. View Article : Google Scholar : PubMed/NCBI
17	Thompson JY, Stoner BR, Piascik JR and Smith R: Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now. Dent Mater. 27:71–82. 2011. View Article : Google Scholar : PubMed/NCBI
18	Mirhashemi A, Sharifi N, Moharrami M and Chiniforush N: Evaluation of different types of lasers in surface conditioning of porcelains: A review article. J Lasers Med Sci. 8:101–111. 2017. View Article : Google Scholar : PubMed/NCBI
19	Ruyter EI, Vajeeston N, Knarvang T and Kvam K: A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements. Acta Biomater Odontol Scand. 3:36–46. 2017. View Article : Google Scholar : PubMed/NCBI
20	Kobayashi K, Komine F, Blatz MB, Saito A, Koizumi H and Matsumura H: Influence of priming agents on the short-term bond strength of an indirect composite veneering material to zirconium dioxide ceramic. Quintessence Int. 40:545–555. 2009.PubMed/NCBI
21	Xie H, Li Q, Zhang F, Lu Y, Tay FR, Qian M and Chen C: Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better? Dent Mater. 32:403–411. 2016. View Article : Google Scholar : PubMed/NCBI
22	Ahn JS, Yi YA, Lee Y and Seo DG: Shear bond strength of MDP-containing self-adhesive resin cement and Y-TZP ceramics: Effect of phosphate monomer-containing primers. Biomed Res Int. 2015:3892342015. View Article : Google Scholar : PubMed/NCBI
23	de Souza G, Hennig D, Aggarwal A and Tam LE: The use of MDP-based materials for bonding to zirconia. J Prosthet Dent. 112:895–902. 2014. View Article : Google Scholar : PubMed/NCBI
24	Valov I, Stoychev D and Marinova T: Study of the kinetics of processes during electrochemical deposition of zirconia from nonaqueous electrolytes. Electrochimica Acta. 47:4419–4431. 2002. View Article : Google Scholar
25	da Silva EM, Miragaya L, Sabrosa CE and Maia LC: Stability of the bond between two resin cements and an yttria-stabilized zirconia ceramic after six months of aging in water. J Prosthet Dent. 112:568–575. 2014. View Article : Google Scholar : PubMed/NCBI
26	Lee SE, Bae JH, Choi JW, Jeon YC, Jeong CM, Yoon MJ and Huh JB: Comparative shear-bond strength of six dental self-adhesive resin cements to zirconia. Materials (Basel). 8:3306–3315. 2015. View Article : Google Scholar
27	Piwowarczyk A, Lauer HC and Sorensen JA: The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent. 30:382–388. 2005.PubMed/NCBI
28	Kim JE, Kim JH, Shim JS, Roh BD and Shin Y: Effect of surface treatment on shear bond strength between resin cement and Ce-TZP/Al2O3. Biomed Res Int. 2016:75769422016.PubMed/NCBI
29	Nagaoka N, Yoshihara K, Feitosa VP, Tamada Y, Irie M, Yoshida Y, Van Meerbeek B and Hayakawa S: Chemical interaction mechanism of 10-MDP with zirconia. Sci Rep. 7:455632017. View Article : Google Scholar : PubMed/NCBI
30	Cabezaa A, Gómez-Alcántaraa M, del M, Olivera-Pastora P, Sobradosb I, Sanz J, Sanz J, Xiao B, Morris RE, Clearfield A and Arandaa MAG: From non-porous crystalline to amorphous microporous metal (IV) bisphosphonates. Microporous and Mesoporous Materials. 114:322–336. 2008. View Article : Google Scholar
31	Chen L, Suh BI, Brown D and Chen X: Bonding of primed zirconia ceramics: Evidence of chemical bonding and improved bond strengths. Am J Dent. 25:103–108. 2012.PubMed/NCBI
32	Magne P, Paranhos MP and Burnett LH Jr: New zirconia primer improves bond strength of resin-based cements. Dent Mater. 26:345–352. 2010. View Article : Google Scholar : PubMed/NCBI
33	Zandparsa R, Talua NA, Finkelman MD and Schaus SE: An in vitro comparison of shear bond strength of zirconia to enamel using different surface treatments. J Prosthodont. 23:117–123. 2014. View Article : Google Scholar : PubMed/NCBI
34	Inokoshi M, Poitevin A, De Munck J, Minakuchi S and Van Meerbeek B: Bonding effectiveness to different chemically pre-treated dental zirconia. Clin Oral Investig. 18:1803–1812. 2014. View Article : Google Scholar : PubMed/NCBI
35	Della Bona A, Anusavice KJ and Shen C: Microtensile strength of composite bonded to hot-pressed ceramics. J Adhesive Dent. 2:305–313. 2000.
36	Kern M and Thompson VP: Bonding to glass infiltrated alumina ceramic: Adhesive methods and their durability. J Prosthet Dent. 73:240–249. 1995. View Article : Google Scholar : PubMed/NCBI
37	Miragaya L, Maia LC, Sabrosa CE, de Goes MF and da Silva EM: Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments. J Adhes Dent. 13:473–480. 2010.