Evaluation of loop‑mediated isothermal amplification assays for rapid detection of blaKPC producing Serratia spp. in clinical specimens: A prospective diagnostic accuracy study
- Authors:
- Published online on: February 1, 2021 https://doi.org/10.3892/etm.2021.9739
- Article Number: 308
-
Copyright: © Liu et al. This is an open access article distributed under the terms of Creative Commons Attribution License.
Abstract
Introduction
Serratia spp., particularly the species Serratia marcescens (S. marcescens), are ubiquitous environmental gram-negative bacteria. They are members of the Enterobacteriaceae family that flourish in all kinds of environments and have become important pathogens and were included in those accounting for hospital-acquired infections in recent years. In general, Serratia spp. does not pose a threat to individuals with normal immunity. However, patients who are hospitalized in the neonatal department, (pediatric) intensive care unit (ICU) or bone marrow transplant and oncology units are immunocompromised or immunosuppressed and the severity of infection is markedly increased (1-3). Serratia spp. infections are also associated with other complications, such as infections in the lower respiratory tract, urinary tract, wounds and the bloodstream (4). Studies have also indicated that Serratia spp. may give rise to corneal ring infiltrates in patients with human immunodeficiency virus through contaminated contact lenses (5,6). Among the infections caused by Serratia spp., bloodstream infection (BSI) is the most prevalent and fatal (7). Hence, a rapid and sensitive characterization method is urgently needed to guide anti-infection therapies (8).
Carbapenem-resistant Enterobacteriaceae (CRE) have become a serious problem worldwide. Resistance to carbapenems is rising year on year due to the spread of carbapenemases, the mutation of penicillin-binding proteins, decreased membrane permeability and overexpression of efflux pumps (9,10). For CRE, the predominant mechanism contributing to such resistance involves carbapenemases, particularly β lactamase Klebsiella pneumoniae carbapenemase (blaKPC), and type B and type D carbapenemases. Genes encoding these carbapenemases have also been detected in S. marcescens (11,12). In addition, other types of carbapenemases, including S. marcescens enzymes, Serratia metallo-β-lactamase, Guiana extended-spectrum β-lactamase and Germany imipenemase, were detected in S. marcescens isolated in different regions (13-18). The high hydrolytic efficiency of these carbapenemases when acting on carbapenem substrates combined with the natural resistance of S. marcescens to polymyxin B and polymyxin E (two restricted antibiotics used for multidrug-resistant bacteria infections), makes the treatment of S. marcescens infections challenging in the clinical setting (19).
Loop-mediated isothermal amplification (LAMP) is a high-specificity, high-efficiency and rapid amplification technology based on PCR. It uses a DNA polymerase with high displacement strand activity and three pairs of specially designed primers to amplify the target sequence (20). LAMP is frequently used to detect infectious diseases among humans, livestock and plants. There are various detection methods for the reaction endpoint, including the turbidity method, agarose gel electrophoresis and UV light detection method. The turbidity method is widely used due to its simple operation and real-time mode. This method detects the by-product of the LAMP reaction (Mg2P2O7, magnesium pyrophosphate, a white precipitate) at an optical density of 650 nm every 6 sec. A variety of microorganisms have been successfully detected by using this method, such as Mycoplasma pneumoniae, Salmonella spp. and Clostridium difficile (21-23).
Due to the prevalence of carbapenem-resistant Serratia spp. in China (24-28), the present study aimed to develop a LAMP method for the rapid characterization of blaKPC producing Serratia spp. (from pure cultures and clinical specimens) with the calcein/Mn2+ complex and a constant turbidity recording system and the reaction characteristics were assessed.
Materials and methods
Bacterial strains and preparation of templates
In the present study, 31 bacterial strains isolated from patients were used, including three different strains of Serratia spp. (S. marcescens DY12303, S. liquefaciens DY12165 and S. rubidaea DY12122). The characteristics of these 31 bacterial strains are listed in Table I. S. marcescens DY12303 with blaKPC-2 was obtained from a patient who was admitted to the ICU at Henan Province Hospital of Traditional Chinese Medicine (TCM; Second Affiliated Hospital of Henan University of TCM, Zhengzhou, China) and validated by a Vitek-2 Compact automated system for ID/AST (Bio Merieux). This strain was used as the positive control for Serratia spp. identification and blaKPC detection. Sequencing of 16s ribosomal (r)RNA and blaKPC-2 were performed using the PCR primers PCR F27, R1492, KPC-forward (F) and KPC-reverse (R) (see Table III). The PCR mixture contained 10 µl PCR 2X master mix reagent (Tiangen Biotech Co., Ltd.), 1 µl 2 µM forward and reverse primers, 1 µl (2 ng) of template and 7 µl double-distilled (dd)H2O. The procedure was as follows: Initial denaturation at 94˚C for 5 min, followed by 35 cycles of 94˚C for 30 sec as the denaturation step, 58˚C for 30 sec as the annealing step and 72˚C for 30 sec as the extension step. For the final extension step, the reaction was held at 72˚C for 10 min. The product was sequenced by Sangon Biotechnology Co., Ltd. and the sequencing results of 16s rRNA and blaKPC-2 were 100% identical to the S. marcescens and blaKPC-2 sequences in GenBank. Genomic DNA from bacteria was extracted using a QIAamp DNA Mini kit (cat. no. 51304; Qiagen GmbH) following the manufacturer's protocol. Purified DNA was diluted 100-fold and saved as a template for the experiments.
Primer design
As the LuxS gene of Serratia spp. diverged from other luxS genes of bacterial species, such as Escherichia coli, Salmonella enterica, Pantoea ananatis, Listeria monocytogenes, Yersinia pestis, and Erwenia amylovora the luxS gene, which is associated with the quorum sensing system of Serratia spp., was selected as the target sequence. The complete luxS gene sequences of S. marcescens ATCC274 (GenBank accession no. AJ628150), S. odorifera (GenBank accession no. GG753567), S. lique faciens ATCC27592 (GenBank accession no. CP006252) and S. rubidaea (GenBank accession no. CP014474) were obtained from the National Center for Biotechnology Information (NCBI) GenBank database (https://www.ncbi.nlm.nih.gov/genbank/) and compared using CLUSTAL W2.1. The sequence alignment results (Fig. S1) were further analyzed using Primer Explorer software V5 (http://primerexplorer.jp/lampv5e/index.html), and forward outer (F3), backward outer (B3), forward internal (FIP), backward internal (BIP), forward loop (LF) and backward loop (LB) primers were designed to optimize the amplification reaction.
To design universal LAMP primers for blaKPC, KPC-1 to KPC-32 (the GenBank accession no. of each blaKPC subtype is listed in Table II) were compared using CLUSTAL W2.1(29). The sequence alignment results were tackled with the same procedure for Serratia spp. To obtain the most appropriate primers, three sets of primers were designed for Serratia spp. and blaKPC. The sensitivity and specificity of the LAMP assay were then compared with those of conventional PCR. To complete this comparison experiment, luxS-F and luxS-R primers for S. marcescens identification and KPC-F and KPC-R for blaKPC identification were designed. The primers were synthesized by Sangon Biotechnology Co., Ltd. and the primer sequences are listed in Table III.
Specificity and sensitivity evaluation of the LAMP assay
To evaluate the sensitivity of the LAMP assay, pure genomic DNA of S. marcescens DY12303 was extracted by using a QIAamp DNA Mini Kit (Qiagen GmbH). DNA quantity and quality were determined with a NanoDrop-1000 Spectrometer (Thermo Fisher Scientific Inc.). The pure genomic DNA was further subjected to serial 10-fold dilutions over a log7 scale with ddH2O. Template concentrations ranging from 392.0 ng/µl to 0.392 pg/µl were measured to compare the detection limit difference between the LAMP assay and conventional PCR.
To determine the specificity, 18 common non-Serratia clinical isolates were evaluated using the Serratia spp. identification LAMP assay. In addition, 12 clinical isolates carrying prevalent resistance genes were used for the specificity evaluation of blaKPC LAMP assays (details of the bacterial strains are presented in Table I).
LAMP assay protocol and product detection
A 25-µl volume of the reaction system of the DNA amplification kit (Eiken Chemical Co., Ltd.) was applied to the LAMP assay. The main components of the reaction system were recorded in the instruction book for the d kit. The final concentrations of primers required for one reaction were as follows: For FIP and BIP 40 pmol, for LF and LB 20 pmol, and for F3 and B3 5 pmol. Finally, 1 µl genomic DNA template was added to the reaction tube (Eiken Chemical Co., Ltd.) containing the materials required for the LAMP reaction. The reaction proceeded at 65˚C for a duration of 60 min. For inactivated products, a reaction temperature of 80˚C for 5 min in a constant-temperature dry bath was used. To detect LAMP products, two different methods were adopted. The first was direct visual inspection; 1 µl of calcein/Mn2+ complex (Eiken Chemical Co., Ltd.) as the indicator was added to 24 µl of LAMP reactants prior to the LAMP reaction. In positive reactions, the color changed from orange to green, whereas in negative reactions, there was no color change. The color change was easily observed under natural light or with the aid of ultraviolet light (365 nm wavelength). An analytical method was also used for reaction monitoring. This method used an LA-230 Loopamp real-time turbidimeter (Eiken Chemical Co., Ltd.) to monitor the turbidity (the white precipitation caused by the presence of magnesium pyrophosphate, Mg2P2O7). The LAMP assay was assessed in real-time by recording the optical density at 650 nm every 6 sec and the turbidity was recorded with the turbidimeter software.
Conventional PCR protocol and product detection
For conventional PCR, 50-µl reaction mixtures were employed. The main components were as follows: 25 µl PCR 2X master mix reagent (Tiangen Biotech Co., Ltd.), 1 µM forward and reverse primers (luxS and KPC; see Table II) and 1 µl of the DNA template. The procedure for conventional PCR was an initial incubation at 94˚C for 2 min, 35 cycles at 94˚C for 30 sec as a denaturation step, 58˚C for 30 sec as the annealing step, and 72˚C for 30 sec as the extension step. For the final extension step, the reaction was held at 72˚C for 10 min. The PCR products were separated by electrophoresis using 1% agarose gels (Amresco) and GelRed (Biotium) as a nucleic acid dye at the recommended concentrations. A Gel Doc XR+ imaging system (Bio-Rad Laboratories, Inc.) was used to image the PCR products.
Evaluation of inhibition in clinical specimens
To evaluate inhibition in clinical specimens, pure DNA extracted by QIAamp DNA Mini Kit (Qiagen GmbH) from the sputum and blood of healthy donors were mixed 1:1 with serially diluted genomic DNA extracted from the clinical isolate S. marcescens DY12303 with blaKPC as templates for the LAMP assay. Thus, the final concentration of templates ranged from 19.6 to 0.0196 pg/µl. Subsequently, 1 µl of DNA template was added to 24 µl of the reaction mixture; the concentrations in the mixture for LAMP were described above. Finally, 25 µl of the LAMP assay mixture was used to evaluate the inhibitory characteristics of the pure DNA extracted from sputum and blood.
LAMP assay evaluation of clinical specimens
Clinical specimens required for the present study were collected at the Henan Province Hospital of TCM (Zhengzhou, China) from January to December 2018. The age range of patients was 4-82 years old, with a mean age of ± SD is 43.67±23.44. The sex ratio was 208 (male): 151 (female). Sputum specimens obtained from the ICU, Neurosurgery department and Oncology department were collected to investigate the efficacy of the LAMP assay for detecting Serratia spp. with blaKPC. First, a conventional culture method was adopted-all clinical specimens were inoculated, cultured, separated and identified in accordance with the national clinical inspection operating procedures of China and the results were used as a gold standard. In short, the clinical samples were inoculated into 5% blood agar medium and cultured at 37˚C for 18-24 h. For Gram-negative bacilli, the isolated strains were biochemically identified according to Bergey's Manual Systematic Bacteriology (30) and compared with positive control strains. In short, the difference between Serratia marcescens and other bacteria in the same genus was arabinose-negative, raffinose-negative and xylose-negative; it may ferment sugars including maltose, glucose, mannose and sucrose. Each specimen was then stored at -20˚C for DNA extraction. To reduce DNA loss during the extraction process, sputazyme (Kyokuto) was used to reduce the viscosity. In brief, the proper volume of sputazyme was added to 500 µl sputum, then boiled for 5 min and subsequently centrifuged at 6,600 x g for 10 min at room temperature. The DNA in the supernatants was used as templates. A QIAamp DNA Microbiome Kit (Qiagen GmbH) was used to extract bacterial DNA from the sputum specimens according to the manufacturer's instructions. Both unpurified and purified DNA were used as templates for LAMP assays and real-time PCR assay (Serratia marcescens genesig Standard kit, Primerdesign Co., Ltd.) to compare the two methods.
Real-time PCR protocol and product detection
A Serratia marcescens genesig Standard kit (Primerdesign Co., Ltd.) was used for real-time PCR in accordance with the manufacturer's protocol. The final volume of the S. marcescens Probe-based Fluorescent quantitative PCR was 20 µl, which contained 10 µl Precision PLUS 2X qPCR Master Mix, 1 µl S. marcescens primer/probe mix, 5 µl (2 ng) of templates and 4 µl RNase-free water. PCR cycling parameters were as follows: 95˚C for 2 min, followed by 50 cycles at 95˚C for 10 sec and 60˚C for 1 min.
Data analysis
Sensitivity, specificity, positive predictive value (PPV), negative predicted value (NPV) and positive likelihood ratio (PLR) were calculated by using Clinical Calculator 1 (http://vassarstats.net/clin1.html#return). The calculations were as follows: Sensitivity=A/(A+C) x100%, Specificity=D/(D+B) x100%, PPV=A/(A+B) x100%, NPV=D/(D+C) x100%, PLR= Sensitivity/(1-Specificity) x100%, where A indicates positivity according to LAMP and conventional culture, B positivity according to LAMP and negativity on conventional culture, C negativity on LAMP and positivity on conventional culture and D negativity on LAMP and conventional culture.
Results
Optimal primers for the LAMP assay of Serratia spp. with blaKPC
A total of three sets of candidate primers were designed for the detection of Serratia spp. and blaKPC. Under the same reaction conditions, it was observed that the primer U5 set amplified the target sequence at 15, 18 and 21 min for S. marcescens DY12303, S. liquefaciens DY12165 and S. rubidaea DY12122, respectively. For the remaining two sets, either low efficiency or amplification failure was observed. Therefore, the U5 sets were chosen, which were able to amplify the target gene in the shortest time, as the optimal reaction primers for Serratia spp. identification (Fig. 1A). For blaKPC detection, primer K17 was confirmed as the fastest and most appropriate primer (Fig. 1B). Accordingly, the U5 and K17 primer sets (listed in Table III) were chosen as the optimal primers for the detection of Serratia spp. with blaKPC in the LAMP assay.
Optimal temperatures for the LAMP assay of Serratia spp. with blaKPC
To determine the most suitable reaction conditions for the selected primers in the LAMP reaction for the detection of Serratia spp. with blaKPC, several temperatures from 61 to 68˚C at 1˚ intervals were evaluated. As indicated in Fig. 2A and B, 64-67˚C was the most suitable temperature range. Based on these results, 65˚C was chosen as the reaction temperature.
Specificity of the LAMP assay for Serratia spp. with blaKPC
To estimate the specificity of the LAMP assay, S. marcescens DY12303 was used as the positive control and ddH2O as the negative control. Furthermore, 18 non-Serratia spp. bacterial strains and 12 clinical isolates without blaKPC were tested in the specificity experiments. Fig. 3A and B indicate that an increase in the turbidity curve only occurred when DNA from S. marcescens DY12303 was used as the template. For the negative control (ddH2O) and the other reference strains, no significant amplification was detected. These results suggested that the primers selected had excellent specificity.
Sensitivity of the LAMP assay for Serratia spp. with blaKPC
As indicated in Fig. 4A-1 and B-1, the detection limit of the LAMP assay for Serratia spp. and blaKPC was 3.92 pg/µl when monitored by a real-time turbidimeter recording system. In addition, a direct visual method was adopted to monitor the results of the LAMP assay for Serratia spp. and blaKPC. Prior to the LAMP reaction, 1 µl of calcein/Mn2+ complex was added to 24 µl of the prepared LAMP reaction mixture. All positive reactions turned green, whereas the negative reactions still remained orange (Fig. 4A-2 and B-2). It was concluded that these two detection methods had similar sensitivities. To compare sensitivities, conventional PCR was also performed by using luxS and blaKPC primers. The amount of template added in the conventional PCR was the same as that for the LAMP assay. It was observed that the detection limit of conventional PCR for luxS and KPC was 39.2 pg/µl (Fig. 4A-3 and B-3). Taken together, these results suggested that the LAMP assay was 10 times more sensitive than conventional PCR.
Inhibition analysis of clinical specimens
Pure genomic DNA extracted from the clinical isolate S. marcescens DY12303, which has blaKPC-2, was used as a positive control and seeded into DNA extracted from the blood and sputum of healthy donors and reaction curves were compared with those of samples from the pure culture. As indicated in Fig. 4A-1 and B-1, compared with the pure culture samples, the sensitivity of the luxS and KPC LAMP assay for the spiked samples was unchanged, at 1.96 pg/µl (Fig. 5A and B). Thus, it was concluded that the DNA extracted from the sputum and blood did not interfere with the LAMP assay.
Performance comparison of the LAMP assay, conventional culture and real-time PCR in detecting clinical specimens of Serratia spp. with blaKPC
In the present study, sputum specimens collected at the Henan Province Hospital of TCM (Zhengzhou, China) were used to examine the feasibility, sensitivity and specificity of the LAMP assay. The LAMP assay was compared with conventional culture and the results of real-time PCR kits. From January to December 2018, a total of 359 sputum specimens were collected. For conventional culturing combined with Taqman probe real-time PCR for blaKPC, 70 positive specimens of blaKPC producing Serratia spp. were detected. For the LAMP assay, with non-purified DNA (boiling method) from sputum specimens as templates, 62 positive specimens of blaKPC producing Serratia spp. were detected. The sensitivity and specificity of the LAMP assay were 94.3 and 94.8%, respectively. However, when the same templates were used for real-time PCR directly, no amplification products were detected due to the existence of interfering substances in the sputum. When purified DNA extracted from the sputum specimens was used as a template for the LAMP assay, the sensitivity and specificity was 94.3 and 94.5%, respectively. When the same templates were used in a real-time PCR assay, the sensitivity was 94.3% and the specificity was 96.0%, which was similar to those of the LAMP assay. The results of the LAMP assay are presented in Table IV. The present results revealed that the LAMP reaction had excellent sensitivity and specificity, and was less susceptible to interfering substances in clinical specimens than the real-time PCR method.
Table IVSensitivity and specificity of Serratia spp. with β lactamase Klebsiella pneumoniae carbapenemase in the loop-mediated isothermal amplification assay. |
Discussion
Serratia spp. are the smallest gram-negative bacilli in the environment and belong to the Enterobacteriaceae family
In the clinical setting, the most commonly encountered species are S. marcescens and S. liquefaciens. S. marcescens is generally considered as an innocuous, non-pathogenic, environmental organism. As its red colonies are easily recognized by the naked eye, it is frequently used as a popular biological marker (31). However, this organism has recently been thought to be an important opportunistic pathogen that may lead to various types of infectious disease in vulnerable populations, such as patients at ICUs and hematopathy departments. Nosocomial infections caused by S. marcescens have reached 1-2%. Infections may take place in any part of the body, with the respiratory tract and the blood stream being the most common (32). Furthermore, in pediatric patients, S. marcescens may give rise to meningitis according to case reports (33). S. marcescens infection may also cause endocarditis and osteomyelitis in patients with heroin addiction (34).
Serratia spp.-associated BSI usually occurs due to contaminated intravenous solutions and is a life-threatening condition that must be diagnosed and treated as soon as possible (35). In recent decades, routine BSI diagnosis has included continuous monitoring of the blood culture by automated systems, subcultivating on an appropriate solid medium and bacterial identification using commercial kits, requiring ~72 h. Although the detection time has been shortened by the introduction of mass spectrometry as an alternative method for bacterial identification directly from positive blood cultures, the specialized equipment and high cost of this method restrict its use in general hospitals and health care units (36). Furthermore, this method cannot be used to detect resistance markers, such as blaKPC, in Serratia spp. Therefore, the development of a convenient, rapid, sensitive detection method for Serratia spp. with blaKPC is required for the diagnosis and treatment of Serratia spp.-associated BSI.
In our experience, lassical culturing used to detect Serratia spp requires >48 h to identify the target pathogen and antibiotic spectrum. Furthermore, the sensitivity of the culture method is insufficient for the detection of Serratia spp. with blaKPC. To the best of our knowledge, a method based on LAMP assays for detecting blaKPC harboring Serratia spp. has not been previously reported. Compared with conventional bacterial culture and identification methods, LAMP assays may proceed at a constant temperature and the time required is only 1 h, saving time and effort. Furthermore, heparin, a commonly used anticoagulant in serum and plasma, which is well-known as an inhibitory substance for conventional PCR, does not affect LAMP assays (37). It's also possible for LAMP assays to detect a pathogen directly from biological fluids, such as blood, pleuroperitoneal fluids and cerebrospinal fluid (38).
After consideration of the epidemiology of Serratia spp. and the advantages of the LAMP assay, the present study aimed to design primers specifically for Serratia spp. with the most prevalent carbapenemase resistance gene, blaKPC, for use in a LAMP assay. The LAMP assay allows clinical specimens to be screened more easily and rapidly than existing techniques.
The sensitivity analysis suggested that the detection limit of the LAMP method reached 3.92 pg/µl for Serratia spp. with blaKPC. A sensitivity comparison with conventional PCR revealed that the LAMP was 10 times more sensitive than conventional PCR. In the specificity analysis, the luxS gene from Serratia spp. (~516 bp) was selected as the target sequence for Serratia spp. identification. It was indicated that Serratia spp. was able to be detected within 30 min and 19 non-Serratia spp. family bacterial strains tested negative, demonstrating good specificity. Furthermore, 12 bacterial strains without blaKPC also produced negative results. In summary, the blaKPC primers designed in the present study were able to detect all subtypes of blaKPC.
It was previously demonstrated that for the LAMP assay, it is unnecessary to purify the DNA from clinical specimens (39). However, exogenous DNA and inhibitors may markedly reduce the sensitivity of PCR. To assess the anti-interference performance of the LAMP method, DNA was extracted from the sputum and blood of healthy donors and spiked specimens were prepared using genomic DNA extracted from the DY12303 bacterial strain and extracts from sputum and blood. The results indicated that the limit of bacterial detection in the LAMP assay with spiked specimens was similar to that for the pure culture.
To investigate the adaptability of the LAMP assay for clinical specimens, 359 sputum specimens were collected and the DNA was extracted with a commercial DNA extraction kit and the boiling method. The detection results for the LAMP assay and real-time PCR were compared with conventional culture methods. The results indicated that the detection efficiency of the LAMP assay was almost the same as that of the conventional culture method and was not affected by the DNA extraction method. For the real-time PCR, the detection efficiency was the same as for the conventional culture method when purified DNA from sputum was used as templates, but no amplification products were detected when non-purified DNA extracted by the boiling method was used as the template. From these results, it was concluded that the LAMP assay had good sensitivity, specificity and efficiency compared with conventional culture and real-time PCR methods. Furthermore, in the present study, the fluorescent reagent (calcein/Mn2+ complex) that was added to the reaction mixture made the detection results more visual and easier to determine. The advantages of the LAMP assay suggested that this method was more suitable than conventional molecular methods, such as regular PCR and real-time PCR, for the rapid detection of blaKPC-producing Serratia spp. in clinical specimens.
In the LAMP reaction, it is not necessary for all of the primers to link with the target sequence. FIP and BIP primers are of great importance and if these primers bind to the target sequence, the signal is positive. However, further studies are required to confirm this assumption (40). Although the amplification principle of the LAMP method is complex, the performance of this method is more feasible and efficient than that of other methods. The operation of the assay may be accomplished under isothermal conditions, which may be achieved in a primary laboratory. Due to its favorable characteristics, this LAMP assay may be adopted by inspection and quarantine departments to perform site inspections for blaKPC-producing Serratia spp. In ICUs of hospitals, the LAMP assay may be used as a means of point-of-care testing to detect resistant bacteria and guide antibiotic usage.
In summary, a detection method based on a LAMP assay for blaKPC-producing Serratia spp. was successfully established. The sensitivity, specificity and feasibility were indicated to be superior to conventional culture methods and molecular biotechnology methods. The most significant feature of the LAMP assay presented in the present study is that it is easy for the staff of a primary laboratory to master. Thus, this assay may have a positive impact in primary hospitals, disease control and prevention departments, as well as inspection and quarantine departments. Furthermore, the present study offers a novel perspective on the infectious characteristics of Serratia spp. and their resistance mechanisms, leading to a greater understanding of antibiotic screening for the treatment of critical care patients.
Supplementary Material
Serratia spp. luxS gene alignment using CLUSTAL W2.1. Rows: 1-, S. marcescens ATCC274; 2-, S. liquefaciens ATCC27592; 3-, S. odorifera; 4-, S. rubidaea.
Acknowledgements
Not applicable.
Funding
This work was supported by the TCM Administration of Henan Province (grant no. 2018ZY0104).
Availability of data and materials
The datasets used and/or analyzed during the current study are available from the corresponding author on reasonable request.
Authors' contributions
YL and WL conceived the study. XL, DZ, and CW performed the experiments. XZ and DP collected the clinical strains and performed the data analysis. DP and WL wrote the manuscript. YL and XL confirmed the authenticity of all the raw data. All authors read and approved the final manuscript.
Ethics approval and consent to participate
The procedures in the present study were approved and documented by the Ethics Committee of Henan Province Hospital of TCM (Zhengzhou, China). All research complied with the declaration of Helsinki and the relevant rules of the Ethics Committee. Informed consent for participation in the study was obtained from all participants (or their parent or legal guardian).
Patient consent for publication
Not applicable.
Competing interests
The authors declare that they have no competing interests.
References
Ogtrop ML, van Zoeren-Grobben D, Verbakel-Salomons EM and van Boven CP: Serratia marcescens infections in neonatal departments: Description of an outbreak and review of the literature. J Hosp Infect. 36:95–103. 1997.PubMed/NCBI View Article : Google Scholar | |
Manning ML, Archibald LK, Bell LM, Banerjee SN and Jarvis WR: Serratia marcescens transmission in a pediatric intensive care unit: A multifactorial occurrence. Am J Infect Control. 29:115–119. 2001.PubMed/NCBI View Article : Google Scholar | |
Dessì A, Puddu M, Testa M, Marcialis MA, Pintus MC and Fanos V: Serratia marcescens infections and outbreaks in neonatal intensive care units. J Chemother. 21:493–499. 2009.PubMed/NCBI View Article : Google Scholar | |
Hsieh S and Babl FE: Serratia marcescens cellulitis following an iguana bite. Clin Infet Dis. 28:1181–1182. 1999.PubMed/NCBI View Article : Google Scholar | |
Chaidaroon W and Supalaset S: Corneal ring infiltrates caused by Serratia marcescens in a patient with human immunodeficiency virus. Case Rep Ophthalmol. 7:359–363. 2016.PubMed/NCBI View Article : Google Scholar | |
Gastmeier P: Serratia marcescens: An outbreak experience. Front Microbiol. 5(81)2014.PubMed/NCBI View Article : Google Scholar | |
Knowles S, Herra C, Devitt E, O'Brien A, Mulvihill E, McCann SR, Browne P, Kennedy MJ and Keane CT: An outbreak of multiply resistant Serratia marcescens: The importance of persistent carriage. Bone Marrow Transplant. 25:873–877. 2000.PubMed/NCBI View Article : Google Scholar | |
Gupta N, Hocevar SN, Moulton-Meissner HA, Stevens KM, McIntyre MG, Jensen B, Kuhar DT, Noble-Wang JA, Schnatz RG, Becker SC, et al: Outbreak of Serratia marcescens bloodstream infections in patients receiving parenteral nutrition prepared by a compounding pharmacy. Clin Infect Dis. 59:1–8. 2014.PubMed/NCBI View Article : Google Scholar | |
Sullivan KV, Deburger B, Roundtree SS, Ventrola CA, Blecker-Shelly DL and Mortensen JE: Pediatric multicenter evaluation of the Verigene gram-negative blood culture test for rapid detection of inpatient bacteremia involving gram-negative organisms, extended-spectrum beta-lactamases, and carbapenemases. J Clin Microbiol. 52:2416–2421. 2014.PubMed/NCBI View Article : Google Scholar | |
Tojo M, Fujita T, Ainoda Y, Nagamatsu M, Hayakawa K, Mezaki K, Sakurai A, Masui Y, Yazaki H, Takahashi H, et al: Evaluation of an automated rapid diagnostic assay for detection of Gram-negative bacteria and their drug-resistance genes in positive blood cultures. PLoS One. 9(e94064)2014.PubMed/NCBI View Article : Google Scholar | |
Nasri E, Subirats J, Sànchez-Melsió A, Mansour HB, Borrego CM and Balcázar JL: Abundance of carbapenemase genes (blaKPC, blaNDM and blaOXA-48) in wastewater effluents from Tunisian hospitals. Environ Pollut. 229:371–374. 2017.PubMed/NCBI View Article : Google Scholar | |
Srisrattakarn A, Lulitanond A, Wilailuckana C, Charoensri N, Wonglakorn L, Saeniamla P, Daduang J and Chanawong A: Rapid and simple identification of carbapenemase genes, bla NDM, bla OXA-48, bla VIM, bla IMP-14 and bla KPC groups, in Gram-negative bacilli by in-house loop-mediated isothermal amplification with hydroxynaphthol blue dye. World J Microbiol Biotechnol. 33(130)2017.PubMed/NCBI View Article : Google Scholar | |
Hopkins KL, Findlay J, Meunier D, Cummins M, Curtis S, Kustos I, Mustafa N, Perry C, Pike R and Woodford N: Serratia marcescens producing SME carbapenemases: An emerging resistance problem in the UK? J Antimicrob Chemother. 72:1535–1537. 2017.PubMed/NCBI View Article : Google Scholar | |
Pollett S, Miller S, Hindler J, Uslan D, Carvalho M and Humphries RM: Phenotypic and molecular characteristics of carbapenem-resistant Enterobacteriaceae in a health care system in Los Angeles, California, from 2011 to 2013. J Clin Microbiol. 52:4003–4009. 2014.PubMed/NCBI View Article : Google Scholar | |
Wachino J, Yoshida H, Yamane K, Suzuki S, Matsui M, Yamaqishi T, Tsutsui A, Konda T, Shibayama K and Arakawa Y: SMB-1, a novel subclass B3 metallo-beta-lactamase, associated with ISCR1 and a class 1 integron, from a carbapenem-resistant Serratia marcescens clinical isolate. Antimicrob Agents Chemother. 55:5143–5149. 2011.PubMed/NCBI View Article : Google Scholar | |
de Vries JJ, Baas WH, van der Ploeg K, Heesink A, Degener JE and Arends JP: Outbreak of Serratia marcescens colonization and infection traced to a healthcare worker with long-term carriage on the hands. Infect Control Hosp Epidemiol. 27:1153–1158. 2006.PubMed/NCBI View Article : Google Scholar | |
Nodari CS, Siebert M, Matte UDS and Barth AL: Draft genome sequence of a GES-5-producing Serratia marcescens isolated in southern Brazil. Braz J Microbiol. 48:191–192. 2017.PubMed/NCBI View Article : Google Scholar | |
Wendel AF, Kaase M, Autenrieth IB, Peter S, Oberhettinger P, Rieber H, Pfeffer K, Mackenzie CR and Willmann M: Protracted regional dissemination of GIM-1-producing Serratia marcescens in western germany. Antimicrob Agents Chemother. 61:e01880–16. 2017.PubMed/NCBI View Article : Google Scholar | |
Mahlen SD: Serratia infections: From military experiments to current practice. Clin Microbiol Rev. 24:755–791. 2011.PubMed/NCBI View Article : Google Scholar | |
Wong YP, Othman S, Lau YL, Son R and Chee HY: Loop mediated isothermal amplification (LAMP): A versatile technique for detection of microorganisms. J Appl Microbiol. 124:626–643. 2017.PubMed/NCBI View Article : Google Scholar | |
Sakai J, Maeda T, Tarumoto N, Misawa K, Tamura S, Imai K, Yamaguchi T, Iwata S, Murakami T and Maesaki S: A novel detection procedure for mutations in the 23S rRNA gene of Mycoplasma pneumoniae with peptide nucleic acid-mediated loop-mediated isothermal amplification assay. J Microbiol Methods. 141:90–96. 2017.PubMed/NCBI View Article : Google Scholar | |
Mashooq M, Kumar D, Niranjan AK, Agarwal RK and Rathore R: Development and evaluation of probe based real time loop mediated isothermal amplification for Salmonella: A new tool for DNA quantification. J Microbiol Methods. 126:24–29. 2016.PubMed/NCBI View Article : Google Scholar | |
Lin M, Liu W, Wang P, Tan J, Zhou Y, Wu P, Zhang T, Yuan J and Chen Y: Rapid detection of ermB gene in Clostridium difficile by loop-mediated isothermal amplification. J Med Microbiol. 64:854–861. 2015.PubMed/NCBI View Article : Google Scholar | |
Cai JC, Zhou HW, Zhang R and Chen GX: Emergence of Serratia marcescens, Klebsiella pneumoniae, and Escherichia coli Isolates possessing the plasmid-mediated carbapenem-hydrolyzing beta-lactamase KPC-2 in intensive care units of a Chinese hospital. Antimicrob Agents Chemother. 52:2014–2018. 2008.PubMed/NCBI View Article : Google Scholar | |
Lin X, Hu Q, Zhang R, Hu Y, Xu X and Lv H: Emergence of Serratia marcescens isolates possessing Carbapenem-hydrolysing β-lactamase KPC-2 from China. J Hosp Infect. 94:65–67. 2016.PubMed/NCBI View Article : Google Scholar | |
Zhou T, Zhang X, Guo M, Ye J, Lu Y, Bao Q and Chi W: Phenotypic and molecular characteristics of carbapenem-non-susceptible Enterobacteriaceae from a teaching hospital in Wenzhou, southern China. Jpn J Infect Dis. 66:96–102. 2013.PubMed/NCBI View Article : Google Scholar | |
Zhang R, Liu L, Zhou H, Chan EW, Li J, Fang Y, Li Y, Liao K and Chen S: Nationwide surveillance of clinical carbapenem-resistant Enterobacteriaceae (CRE) strains in China. EBioMedicine. 19:98–106. 2017.PubMed/NCBI View Article : Google Scholar | |
Li B, Feng J, Zhan Z, Yin Z, Jiang Q, Wei P, Chen X, Gao B, Hou J, Mao P, et al: Dissemination of KPC-2-encoding IncX6 plasmids among multiple Enterobacteriaceae Species in a Single Chinese Hospital. Front. Microbiol. 9(478)2018.PubMed/NCBI View Article : Google Scholar | |
Thompson JD, Higgins DG and Gibson TJ: CLUSTAL W: Improving the sensitivity of progressive multiple sequence alignment through sequence weighting, position-specific gap penalties and weight matrix choice. Nucleic Acids Res. 22:4673–4680. 1994.PubMed/NCBI View Article : Google Scholar | |
Garrity G, Staley JT, Boone DR, De Vos P, Goodfellow M and Rainey FA: Bergey's manual® of systematic bacteriology. In: Vol 2 The Proteobacteria, Part B: The Gammaproteobacteria. Springer, New York, NY, 2006. | |
Joyner J, Wanless D, Sinigalliano CD and Lipp EK: Use of quantitative real-time PCR for direct detection of Serratia marcescens in marine and other aquatic environments. Appl Environ Microbiol. 80:1679–1683. 2014.PubMed/NCBI View Article : Google Scholar | |
Ferrer R, Martin-Loeches I, Phillips G, Osborn TM, Townsend S, Dellinger RP, Artiqas A, Schorr C and Levy MM: Empiric antibiotic treatment reduces mortality in severe sepsis and septic shock from the first hour: Results from a guideline-based performance improvement program. Crit Care Med. 42:1749–1755. 2014.PubMed/NCBI View Article : Google Scholar | |
Khanna A, Khanna M and Aggarwal A: Serratia marcescens-a rare opportunistic nosocomial pathogen and measures to limit its spread in hospitalized patients. J Clin Diagn Res. 7:243–246. 2013.PubMed/NCBI View Article : Google Scholar | |
Farhoudi HO, Banks T and Ali N: A case report of serratia endocarditis with review of the literature. Med Ann Dist Columbia. 43:401–406. 1974.PubMed/NCBI | |
Su JR, Blossom DB, Chung W, Gullion JS, Pascoe N, Heseltine G and Srinivasan A: Epidemiologic investigation of a 2007 outbreak of Serratia marcescens bloodstream infection in Texas caused by contamination of syringes prefilled with heparin and saline. Infect Control Hosp Epidemiol. 30:593–595. 2009.PubMed/NCBI View Article : Google Scholar | |
Chemaly RF, Rathod DB, Sikka MK, Hayden MK, Hutchins M, Horn T, Tarrand J, Adachi J, Nguyen K, Trenholme G and Raad I: Serratia marcescens bacteremia because of contaminated prefilled heparin and saline syringes: a multi-state report. Am J Infect Control. 39:521–524. 2011.PubMed/NCBI View Article : Google Scholar | |
Enosawa M, Kageyama S, Sawai K, Watanabe K, Notomi T, Onoe S, Mori Y and Yokomizo Y: Use of loop-mediated isothermal amplification of the IS900 sequence for rapid detection of cultured Mycobacterium avium subsp. paratuberculosis. J Clin Microbiol. 41:4359–4365. 2003.PubMed/NCBI View Article : Google Scholar | |
Dhama K, Karthik K, Chakraborty S, Tiwari R, Kapoor S, Kuamr A and Thomas P: Loop-mediated isothermal amplification of DNA (LAMP): A new diagnostic tool lights the world of diagnosis of animal and human pathogens: A review. Pak J Biol Sci. 17:151–166. 2014.PubMed/NCBI View Article : Google Scholar | |
Notomi T, Mori Y, Tomtia N and Kanda H: Loop-mediated isothermal amplification (LAMP): Principle, features, and future prospects. J Microbiol. 53:1–5. 2015.PubMed/NCBI View Article : Google Scholar | |
Lin WH, Zou BJ, Song QX and Zhou GH: Progress in multiplex loop-mediated isothermal amplification technology. Yi Chuan. 37:899–910. 2015.PubMed/NCBI View Article : Google Scholar |